Dual Trap Assembly

Our dual trap is used to control the removal of condensate from both the ejector inter- and aftercondenser to the main condenser hotwell. It takes the place of a loop seal & trap or two separate traps and is divided into two separate chambers. The condensate from the intercondenser drains by gravity into the right-hand chamber (as seen from the discharge side of the trap). The condensate from the aftercondenser drains by gravity to the left-hand chamber. The condensate discharge is controlled by separate float-operated valves and discharges into the hotwell of the main condenser. There are removable covers on each chamber to permit access to the valve mechanism which can be easily replaced. Replacement parts are readily available.